Custom fabricator of split sprockets made from Polystone®. Split sprockets are available in teeth configurations ranging Steel Splitfrom 13 to 25 with specifications including 12.89 in. to 24.10 in. pitch diameter, 0.930 g/cu.cm to 0.960 g/cu.cm density, 2,700 psi to 3,100 psi tensile strength, 265 percent to 350 percent elongation, 275 degrees F to 280 degrees F melting point, minus 450 degrees F to plus 180 degrees F operating temperature & 40 kV/mm dielectric strength. Split sprockets are chemical, abrasion, noise & wear resistant with low coefficient of friction. Sprockets are suitable for conveyors, bulk material handling & waste water applications. ASTM, FDA & USDA approved. Meets Military Spec.