XT LASER generally recommend that customers purchase screw type oil-free air flow compressor, power is 7.5KW. The very best pressure up to 9 kg (but also to achieve a minimum of 8 kg). The exhaust volume greater than 0.6 each and every minute. If the customer has bought the best oil air compressor with two essential oil filter. So as to reduce some drinking water and dirty.
The fiber laser cutting machine must meet up with the cutting requirements of varied components and complex shapes. But it does not operate with out a clean, dry, steady Screw Air Compressor For Laser Cutting compressed surroundings. The compressed air partly made up of high natural oxygen and high purity nitrogen to supply trimming gas to the slicing head. A part provided to the cylinder of the clamping table as a power supply. And the last part is utilized to 
blow and dirt the optical path program.
From the air discharged from the compressed air through the dryer in to the gas tank and gas control cabinet, through a sophisticated processing system, a gas dry and clean, and finally into the three road, were used as cutting gas cylinder, power source and light street dust gas pressure to keep up the normal procedure of laser cutting machine.