Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Application Notice” below for utilize in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you possess a pull-chain). In the event that you order several motor at the same time, we can do our Electric Fan Motor better to supply your order with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a totally enclosed fan electric motor and designed to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electrical motor will overheat and enter automated thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automatic thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric motor is produced in China.