China Crawler-Type Micro Tiller Small Greenhouse Field Woodland Ditching Sowing Agricultural Rotary Tiller agricultural gearbox games

Product Description

Crawler-Type Micro Tiller Small Greenhouse Field Woodland Ditching Sowing Agricultural Rotary Tiller
1. The design of the frame is reasonable, and the thickened steel plate is used, which is strong and durable, effectively reducing the vibration generated by the engine and prolonging the life of the machine;
2. The engine adopts HangZhou 25 horsepower single-cylinder engine, the body is small, the turning and steering are flexible, and it is easy to control and operate;
3. It adopts a customized pure gear gearbox, which is equipped with a walking gearbox and a rear agricultural tool gearbox, which reduces the load of the machine and prolongs the service life of the machine. The front is a walking gearbox, with 3 forward gears and 1 reverse gear, respectively equipped with high and low gears, a total of 8 gears, unique lock gear design, more user-friendly, a large number of agricultural tools such as ditching;
4. The track is composed of rubber + steel wire + iron skeleton. Strong and durable, large adhesion area, strong grip ability, enhanced friction, more flexible steering and walking, no problems such as rollover and tilt;
5. The driving wheel is made of steel through heat treatment, which is strong and wear-resistant;
6. It adopts the design of 1 drive wheel, 4 support wheels and 1 tension wheel on 1 side. The support wheel tension wheel is produced by the CNC machining center, the diameter is enlarged, and the wheel edge is thickened. 2 steel bearings and rubber oil seals are installed in each wheel to enhance the flexibility of the wheel. The oil seal can prevent dirt and other impurities from entering the wheel and prolong the service life of the wheel;
7. The sheet metal parts of the machine are made of thickened steel plates above T3, which are strong and durable, and not easy to deform.
8. The left and right steering adopts a pull rod mechanism, which is easy to operate and not easy to damage or fail;
9. The installation of a 500W all-copper generator can ensure that the machine will not be unable to start the battery due to lack of power, thus prolonging the service life of the battery;
10. The air filter adopts the oil type, which can effectively filter the dust and mud generated by the agricultural implements, ensure the normal operation of the engine, and prolong the service life of the engine;
11. The line is made of all copper wire, with multiple insurances, and it is easy to operate in the form of a plug. The outside of the line is protected by a thickened plastic soft shell, which will not cause the line to be aged and damaged. The line installation is fixed with tools such as iron leather clips and ties, and the installation is stable and will not fall off;
12. It can be equipped with a variety of agricultural implements, and 1 machine can be used for multiple purposes. It can be used together with the walking tractor 101 agricultural implements, saving time and effort. The machine is suitable for small-scale operations such as orchards, greenhouses, and woods.
The Ride Crawler LX25 allows to change the color and logo of the product. You can contact us to determine your requirements.
  ZheJiang Lugong Machinery Co., Ltd. was established in March 2000. It is located at the junction of HangZhou, HangZhou and HangZhou – HangZhou Industrial and Trade Park in HangZhou. It is a national backbone enterprise of construction machinery and has fixed assets of 500 million yuan. It covers an area of 200,000 square meters and has 1,100 employees, including 88 engineers and technicians.
The company mainly produces loaders, excavators, dump trucks, tricycles, etc. The products are mainly sold to more than 20 domestic provinces and cities, and exported to dozens of countries and regions such as Africa, Southeast Asia, South America, and Russia. The quality and performance of our small farm loaders and construction dump trucks are nationally leading in the industry and well received by users. Now, “Lugong” brand loaders and dump trucks have been recognized and used by dealers all over the country.
As always, we focus on quality, performance and user considerations. In terms of management, we have adopted the ISO9001:2015 international quality management system, which has reached a new level.
Q: Are you a manufacturer?
A: Yes, we are A ZheJiang Lugong Manufacturing enterprise. ZheJiang province is the manufacturing center of construction machinery. The company has passed ISO and CE certification, products are exported to more than 20 countries and regions.
Q: Can you make custom machines?
A: Yes, we can supply custom machines according to your requirements. We have 8 senior engineers who can design and provide higher configurations.
Q: How is your after-sales service?
A: We have A number of after-sales services that provide 24-hour technical support via phone and mail.
Q: What is your lead time?
A: It takes 7-10 days for normal goods and 15-25 days for customization.
Q: Is it convenient to visit your factory? How do I get there?
A: Warmly welcome you to visit our factory. We’ll pick you up when you arrive.

###

###

###

###

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

editor by czh 2022-11-27