Combination Chains used extensively in the cement.paper and pulp, quarrying, and mining industries for elevating and conveying a variety of abrasive and non-abrasive materials.Additionally it is acquiring many uses generally commercial assembly conveyors. It is not suggested for drive chain.The construction of our Combination Chain could possibly be either cottered or riveted. Cottered is generally considered regular. Pins possess clean areas at their ends, which lock into the properly punched sidebars, stopping pin rotation during chain treatment.
All pin holes are clean-cored for soft bearing Cast combination chains surfaces and are dimensioned for proper pin clearance. Sector dimensional specifications are rigidly managed which chain may be interchanged with links of additional manufacturers. Pitch sizes range between 1.631 to 6.050 ins; tensile power range ex1ends from 12,150 to 67,500 pounds.
All of the factory’s Combination block links except C55 and C55L have elliptical barrels. This gives extra metal where the sprocket to chain speak to causes the majority of chain wear.
Attachments are available in many of the pitch sizes for an array of applications.
Combination links are symmetrical and may therefore become operated in either direction of travel. Brutaloy and cast steel sprockets can be found for every pitch size.
Our Drive Chain Promal (Duramal) chains have temperature treated pins with Promal (Duramal) prevent links. Incredibly Promal ( Duramal) chains possess temperature treated pins and sidebars with Promal ( Duramal) block links.Chains are also available with block links of the hard Promal (Duramal)