NIKAI’s NT 800 is a double free-circulation pallet conveyor transport program driven by smooth belts, timing belts or accumulation roller chain. With that one model, we are able to realize functions on the work piece from all 6 feasible sides. This conveyor is usually specially made to coordinate the diverse procedures, manual or automatic, during assembly or manufacturing.

One of the principal characteristics of the system is its flexibility where in an instant we can recognize conveying operations or basic assembly. Later on, and attending to the new needs of customers, NIKAI can offer extensions by way of all the available accessories such transfers, elevators, lifting and positioning stations, turn stations, stoppers, etc.

The mechanical facet of the system contains a chassis of extrusioned aluminium (two profiles linked Drive Chain together) where the upper part supports the conveying components (chain or timing belt) and above this, the pallets with their specific tooling.

For the proper sliding movement for the conveying components (chain or timing belt), the aluminium profiles have attached a yellow ceramic polyethylene material when working with chains and a Family pet support bed when using timing belts.

Variants exist when the drives are in end or central position. In the attached drawing, the various configurations could be observed.

The tooling pallets consist of three parts: the sliding PET’s, the flange and the 2Q==specific tooling required to move the task piece. The pallets can be halted or accumulated by way of stopper units since the chain or the timing belt is not physically joined up with to the pallets in question.